Prestige 645M-A1 ADSL Bridge
Troubleshooting
8-1
Chapter 8
Troubleshooting
This chapter covers problems you may run into and possible remedies. After each problem
description, some instructions are provided to help you diagnose and solve the problem.
8.1 Problems Starting Up the Prestige
Table 8-1 Troubleshooting the Start-Up of your Prestige
PROBLEM CORRECTIVE
ACTION
None of the LEDs are on when
you turn on the Prestige
Make sure that you use the correct power adapter and that is plugged
in and connected to the Prestige.
If the error persists, you may have a hardware problem. In this case
you should contact your vendor.
8.2 Problems Telnetting into the Prestige
Table 8-2 Troubleshooting Telnet
PROBLEM CORRECTIVE
ACTION
Check the LAN port and the other Ethernet connections.
Check your computer’s IP address, it should be in the same subnet as
the Prestige.
Can’t access the Prestige
through telnet.
Use the reset button as follows to restore the IP address to
192.168.1.1, subnet mask to 255.255.255.0 and the password to
1234.
Turn the Prestige off. Use a pointed object to push the RESET button
while you turn the Prestige back on. Keep the RESET button pressed
for one minute.