Prestige 645M-A1 ADSL Bridge
Hardware Installation & Initial Setup
2-1
Chapter 2
Hardware Installation & Initial Setup
This chapter describes the physical features and cable connections of the Prestige and how to access
and use the SMT interface for configuration
.
2.1 Front Panel LEDs of the Prestige
The LED indicators on the front panel indicate the operational status of the Prestige
Figure 2-1 Prestige Front Panel
The table below describes the status of the front panel LEDs.
Table 2-1 Front Panel LED Description
LED
COLOR STATUS
DESCRIPTION
PWR
Green
On
The Prestige is receiving power.
Off
The Prestige is not receiving power.
SYS
Green
On
The Prestige is functioning properly.
Blinking
The Prestige is rebooting.
Off
The Prestige is not ready or has malfunctioned.
Red
On
Dying gasp action. The power to the Prestige is too low.
LAN 10M
Green
On
The Prestige has a successful 10Mb Ethernet connection.
Blinking
The Prestige is receiving or sending data.
Off
No device is connected at 10Mb.