Prestige 645M-A1 ADSL Bridge
Enter a unique
name, up to eight
characters, for the
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP
Active= Yes
Encapsulation= RFC 1483
Multiplexing= VC-based
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Bridge:
Ethernet Addr Timeout(min)= 0
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Filter Sets
Input Device Filters=
Output Device Filters=
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 4-2 Remote Node Profile
Table 4-1 Remote Node Profile
FIELD DESCRIPTION
EXAMPLE
Rem Node Name
Type a unique, descriptive name of up to eight characters for
this node.
MyISP
Active
Press [SPACE BAR] and then [ENTER] to select
Yes
to
activate or
No
to deactivate this node. Inactive nodes are
displayed with a minus sign “–“ in SMT menu 11.
Yes
Encapsulation
PPPoA
refers to RFC-2364 (PPP Encapsulation over ATM
Adaptation Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM Adaptation
Layer 5) of
ENET
ENCAP
are selected,
then the
Rem
Login
,
Rem
Password
,
My Login
,
My
Password
,
Edit PPP
Options and
Authen
fields are not
applicable (
N/A
).
PPPoA
Multiplexing
Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either
VC-based
or
LLC-
based
.
LLC-based
Incoming:
Rem Login
Type the login name that this remote node will use to call your
Prestige. The login name and the
Rem
Password
will be used
to authenticate this node.
Rem Password Type the password used when this remote node calls your
Prestige.
Remote Node Configuration
4-3