Prestige 645M-A1 ADSL Bridge
Menu 24.5 – Backup Configuration
To transfer the configuration file to your workstation, follow the procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Locate the ‘rom-0’ file.
4. Type ‘get rom-0’ to back up the current system configuration to your
workstation.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in the menu to back up using TFTP), please see your user manual.
Press ENTER to Exit:
Figure 7-1 Backup Configuration
7.2.2 Using the FTP command from the DOS Prompt
Step 1.
Launch the FTP client on your computer.
Step 2.
Enter “open” and the IP address of your Prestige.
Step 3.
Press
[ENTER]
when prompted for a username.
Step 4.
Enter “root” and your SMT password as requested. The default is 1234.
Step 5.
Enter “bin” to set transfer mode to binary.
Step 6.
Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0
config.rom” transfers the configuration file on the Prestige to your computer and renames it
“config.rom”. See earlier in this chapter for more information on filename conventions.
Step 7.
Enter “quit” to exit the ftp prompt.
Configuration and Firmware File Maintenance
7-3