ZyXEL Communications P8802T, User Manual

Page: 239 / 278

Chapter 16 Diagnostic
Basic Home Station VDSL2 P8802T User’s Guide
239
Figure 101
802.1ag Connectivity Fault Management
The following table describes the fields in this screen.
Table 86
802.1ag Connectivity Fault Management
LABEL DESCRIPTION
802.1ag Connectivity Fault Management
Maintenance
Domain (MD)
Level Select a level (0-7) under which you want to create an MA.
Destination
MAC Address Enter the target device’s MAC address to which the VDSL Router performs a CFM loopback
test.
802.1Q VLAN
ID Type a VLAN ID (0-4095) for this MA.
VDSL Traffic
Type This shows whether the VDSL traffic is activated.
Loopback
Message (LBM) This shows how many Loop Back Messages (LBMs) are sent and if there is any inorder or
outorder Loop Back Response (LBR) received from a remote MEP.
Linktrace
Message (LTM) This shows the destination MAC address in the Link Trace Response (LTR).
Set MD Level Click this button to configure the MD (Maintenance Domain) level.
Send Loopback Click this button to have the selected MEP send the LBM (Loop Back Message) to a specified
remote end point.
Send Linktrace Click this button to have the selected MEP send the LTMs (Link Trace Messages) to a
specified remote end point.