ZyXEL Communications P8802T, User Manual

Page: 112 / 278

Chapter 5 LAN Setup
Basic Home Station VDSL2 P8802T User’s Guide
112
5.4.1
LANs, WANs and the VDSL Router
The actual physical connection determines whether the VDSL Router ports are LAN or WAN ports.
There are two separate IP networks, one inside the LAN network and the other outside the WAN
network as shown next.
Figure 36
LAN and WAN IP Addresses
5.4.2 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the VDSL Router as a DHCP
server or disable it. When configured as a server, the VDSL Router provides the TCP/IP
configuration for the clients. If you turn DHCP service off, you must have another DHCP server on
your LAN, or else the computer must be manually configured.
IP Pool Setup
The VDSL Router is pre-configured with a pool of IP addresses for the DHCP clients (DHCP Pool).
See the product specifications in the appendices. Do not assign static IP addresses from the DHCP
pool to your LAN computers.
5.4.3 DNS Server Addresses
DNS (Domain Name System) maps a domain name to its corresponding IP address and vice versa.
The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The DNS server addresses you enter when you set up DHCP are
passed to the client machines along with the assigned IP address and subnet mask.
There are two ways that an ISP disseminates the DNS server addresses.
• The ISP tells you the DNS server addresses, usually in the form of an information sheet, when
you sign up. If your ISP gives you DNS server addresses, enter them in the DNS Server fields in
the DHCP Setup screen.
WAN
LAN