ZyXEL Communications P8802T, User Manual

Page: 130 / 278

Chapter 8 Quality of Service (QoS)
Basic Home Station VDSL2 P8802T User’s Guide
130
Figure 46
QoS Queue Setup
The following table describes the labels in this screen.
Table 40
QoS Queue Setup
LABEL DESCRIPTION
Name This shows the descriptive name of this queue.
Key This is the queue’s index number.
Status This field displays whether the queue is active or not. A yellow bulb signifies that this queue
is active. A gray bulb signifies that this queue is not active.
Interface This shows the name of the VDSL Router’s interface through which traffic in this queue
passes.
Qid This shows the priority of this queue for the interface.
Prec/Alg/Wght This displays the queue’s default precedence, queue management algorithm, and weighted
round robin weight.
DSL Latency This displays whether the ATM interface uses interleave delay (Path1) or fast mode with no
interleave delay (Path0).
PTM Priority This displays the queue’s PTM priority (High or Low). This has no effect at the time of
writing.
Shaping Rate This displays the maximum transmission rate for traffic in this queue.
Burst Size This displays the maximum number of cells the queue can send at the shaping rate.
Enable Select an entry’s Enable option and click the Enable button to turn it on.
Remove Select an entry’s Remove option and click the Remove button to delete it.
Add Click this button to create a new queue entry.