ZyXEL Communications P-660HWP-D1, User Manual

Page: 67 / 374

Chapter 3 Wizard Setup for Internet/Wireless Access
P-660HWP-D1 User’s Guide
67
Figure 32 Manually assign a WEP key
The following table describes the labels in this screen.
7 Click Apply to save your wireless LAN settings.
Figure 33 Wireless LAN Setup 3
8
Use the read-only summary table to check whether what you have configured is correct.
Click
Finish to complete the wizard setup, or click Go to Media Bandwidth
Management page to start the Bandwidth Management wizard, or click Go to
Advanced Setup page to configure advanced settings.
Table 18 Manually assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the P-660HWP-D1 and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 English keyboard characters or 10, 26 or 58 hexadecimal
characters (“0-9”, “A-F”) for a 64-bit, 128-bit or 256-bit WEP key respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.