ZyXEL Communications P-202H Plus v2, Support Notes

Page: 88 / 434

P-202H Plus v2 Support Notes
protocol filters= 2
device filters=
Output Filter Sets:
protocol filters=
device filters=
6. UNIX syslog Setup
•
P-202H Plus v2 Setup
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
UNIX Syslog:
Active= Yes
Syslog IP Address= 192.168.1.33
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
POTS log= No
Firewall log= No
Configuration:
1. Active , use the space bar to turn on the syslog option.
2. Syslog IP Address , enter the IP address of the UNIX server that you wish to
send the syslog.
3.
Log Facility, use the space bar to toggle between the 7 different local options.
4. Types , use the space bar to toggle the logs we are going to record.
•
UNIX Setup
1. Make sure that your syslogd starts with -r argument.
-r , this option will enable the facility to receive message from the network using
an Internet domain socket with the syslog services. The default setting is not
enabled.
All contents copyright © 2006 ZyXEL Communications Corporation.
88