ZyXEL Communications P-202H Plus v2, Support Notes

Page: 41 / 434

P-202H Plus v2 Support Notes
ƒ
Set the Internet gateway to the router that is connecting to
ISP
o
P-202H Plus v2 router setup
•
Before making a VPN connection from Win9x to WinNT server, you need
to connect P-202H Plus v2 router to your ISP first.
•
Enter the IP address of the PPTP server (WinNT server) and the port
number for PPTP as shown below.
When you have finished the above settings, you can ping to the remote
Win9x client from WinNT. This ping command is used to demonstrate that
remote the Win9x can be reached across the Internet. If the Internet
connection between two LANs is achive, you can place a VPN call from
the remote Win9x client.
For example:
C:\ping 203.66.113.2
When a dial-up connection to ISP is established, a default gateway is
assigned to the router traffic through that connection. Therefore, the
output below shows the default gateway of the Win95 client after the dial-
up connection has been established.
Before making a VPN connection from the Win9x client to the NT server,
you need to know the exact Internet IP address that the ISP assigns to P-
All contents copyright © 2006 ZyXEL Communications Corporation.
41