ZyXEL Communications P-202H Plus v2, Support Notes

Page: 316 / 434

P-202H Plus v2 Support Notes
2. Setup P-202H Plus v2 VPN
1. Using a web browser, login P-202H Plus v2 by giving the LAN IP address
of P-202H Plus v2 in URL field. Default LAN IP is 192.168.1.1 , default
password to login web configurator is 1234 .
2. Go to Advanced -> VPN
3. Check Active box to enable this rule. Check Keep alive to make your
VPN connection stay permanent.
4. Select Negotiation Mode to Main , as we configured in Sentinel.
5. Local IP, Address Type is Subnet , Address Start is 192.168.1.0 ,
End/Subnet Mask is 255.255.255.0 .
6. Remote IP Address Start is Sentinel's IP, 192.168.2.33 .
7. My IP Addr is the WAN IP of P-202H Plus v2.
8. Secure Gateway IP Addr is the NAT Router's IP .
9. Select Encapsulation Mode to Tunnel .
10. Check the ESP check box. (AH can not be used in SUA/NAT case)
11. Select Encryption Algorithm to DES and Authentication Algorithm to
MD5 , as we configured in Sentinel.
12. Enter the key string 12345678 in the Preshared Key text box, and click
Apply .
13. Press Advanced button to set IKE phase 1 and phase 2 parameters.
All contents copyright © 2006 ZyXEL Communications Corporation.
316