ZyXEL Communications P-202H Plus v2, Support Notes

Page: 253 / 434

P-202H Plus v2 Support Notes
Active= Yes
My IP Addr= 172.21.1.252
Secure Gateway IP Addr= 172.21.1.232
Protocol= 0
Local: IP Addr Start= 192.168.1.33 End= 192.168.1.33
Port Start= 0 End= N/A
Remote: IP Addr Start= 172.21.1.232 End= 172.21.1.232
Port Start= 0 End= N/A
Enable Replay Detection= No
Key Management= IKE
Edit IKE Setup=
Yes
Edit Manual Setup= N/A
Press ENTER to Confirm or ESC to Cancel:
1. Edit IKE settings by selecting 'Edit IKE Setup' option in menu 27.1.1 to 'Yes'
and then pressing 'Enter'.
2. There are two phases for IKE:
In Phase 1, two IKE peers establish a secure channel for key exchanging.
In Phase 2, two peers negotiate general purpose SAs which are secure channels
for data transmission.
Please note that any configuration in 'IKE Setup' should match the settings
configured in WIN2K
Menu 27.1.1.1 - IKE Setup
Phase 1
Negotiation Mode= Main
Pre-Shared Key= 12345678
Encryption Algorithm= DES
Authentication Algorithm= MD5
SA Life Time (Seconds)= 3600
Key Group= DH1
Phase 2
Active Protocol= ESP
Encryption Algorithm= DES
Authentication Algorithm= MD5
SA Life Time (Seconds)= 3600
Encapsulation= Tunnel
All contents copyright © 2006 ZyXEL Communications Corporation.
253