ZyXEL Communications P-202H Plus v2, Support Notes

Page: 127 / 434

P-202H Plus v2 Support Notes
Please note that a server can support more than one service, e.g., a server can
provide both FTP and Mail service, while another provides only Web service.
The following procedures show how to configure a server behind NAT.
Step 1. Enter 15 in the Main Menu to go to Menu 15-NAT Setup .
Step 2. Enter 2 to go to Menu 15.2-NAT Server Setup .
Step 3. Enter the service port number in the Port# field and the inside IP address
of the server in the IP Address field.
Step 4. Press [SPACEBAR] at the 'Press ENTER to confirm...' prompt to save
your configuration after you define all the servers or press ESC at any time to
cancel.
Menu 15.2 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 80 80 192.168.1.10
3. 21 21 192.168.1.11
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
All contents copyright © 2006 ZyXEL Communications Corporation.
127