ZyXEL Communications NVG2053, User Manual

Page: 87 / 200

Chapter 7 Broadband
NVG2053 User’s Guide
87
This screen displays when you select the Routing mode and PPPoE
encapsulation.
Figure 30 Network > Broadband: PPPoE Encapsulation
The following table describes the labels in this screen.
Table 20 Network > Broadband: PPPoE Encapsulation
LABEL DESCRIPTION
General
Name
Specify a descriptive name of up to 15 alphanumeric characters for this
connection.
Mode Select Routing (default) from the drop-down list box if your ISP give
you one IP address only and you want multiple computers to share an
Internet account.
Select Bridge when your ISP provides you more than one IP address
and you want the connected computers to get individual IP address
from ISP’s DHCP server directly. If you select Bridge, you cannot use
routing functions, such as QoS, Firewall, DHCP server and NAT on
traffic from the selected LAN port(s).
Encapsulation Select PPPoE for a dial-up connection.
PPP Information
PPP Username
Enter the user name exactly as your ISP assigned. If assigned a name
in the form user@domain where domain identifies a service name, then
enter both components exactly as given.