ZyXEL Communications NVG2053, User Manual

Page: 64 / 200

Chapter 4 Introducing the Web Configurator
NVG2053 User’s Guide
64
Log View Log Use these screens to view the logs for the categories that you
selected and change your log settings.
Log Settings
DHCP Table Use this screen to view information related to your DHCP status.
Packet Statistics Use this screen to view port status, packet specific statistics, the
"system up time" and so on.
WLAN Station
Status Association
List Use this screen to view the wireless stations that are currently
associated to the NVG2053.
Configuration
Network
Broadband Use this screen to add or remove a WAN connection and configure
ISP parameters, WAN IP address assignment, and other advanced
properties
Wireless LAN General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
MAC Filter Use this screen to configure MAC filtering rules.
Advanced Use this screen to configure the advanced wireless LAN settings.
QoS WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to enable WPS (Wi-Fi Protected Setup) and view
the WPS status.
WPS Station Use this screen to use WPS to set up your wireless network.
Scheduling Use this screen to configure the times to enable or disable the
wireless LAN.
LAN IP Use this screen to configure NVG2053’s LAN IP address.
Advanced Use this screen to enable IP multicasting for your NVG2053 LAN
interface.
DHCP Server General Use this screen to enable the DHCP server for the LAN.
Advanced Use this screen to to always assign specific IP addresses to
individual MAC addresses (and host names).
Client List Use this screen to view current DHCP client information and to
always assign specific IP addresses to individual MAC addresses
(and host names).
QoS General Use this screen to enable QoS and define QoS classes.
NAT General Use this screen to enable NAT.
Port
Forwarding Use this screen to make your local servers visible to the outside
world.
Dynamic DNS This screen allows you to use a static hostname alias for a
dynamic IP address.
Static Route Use this screen to configure IP static routes to tell your device
about networks beyond the directly connected remote nodes.
UPnP Use this screen to turn UPnP on or off.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Table 12 Navigation Panel Summary
LINK TAB FUNCTION