manualshive.com logo in svg

ZyXEL Communications MES3500-24, User Manual

Share
Download
ZyXEL Communications MES3500-24 User Manual Download Page 267

 Chapter 34 Static Route

MES3500-24/24F User’s Guide

267

Name

This field displays the descriptive name for this route. This is for identification 
purposes only.

Destination 
Address

This field displays the IP network address of the final destination. 

Subnet Mask

This field displays the subnet mask for this destination.

Gateway 
Address

This field displays the IP address of the gateway. The gateway is an immediate 
neighbor of your Switch that will forward the packet to the destination. 

Metric

This field displays the cost of transmission for routing purposes.

Delete

Click Delete to remove the selected entry from the summary table.

Cancel

Click Cancel to clear the Delete check boxes.

Table 106   

IP Application > Static Routing  (continued)

LABEL

DESCRIPTION

Summary of Contents for MES3500-24






























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands