ZyXEL Communications MAX-200M1 Series, User Manual

Page: 76 / 258

ZyXEL MAX-200M1 Series User’s Guide
76 Chapter 7 WAN Setup
Use the WiMAX Frequency screen to define the radio frequencies to be searched for
available wireless connections. See Section 7.4.2.1 on page 77 for an example of using the
WiMAX Frequency screen.
• The ZyXEL Device searches the DL Frequency settings in ascending numerical order,
from [0] to [9] .
• If you enter a 0 in a DL Frequency field, the ZyXEL Device immediately moves on to
the next DL Frequency field.
• When the ZyXEL Device connects to a base station, the values in this screen are
automatically set to the base station’s frequency. The next time the ZyXEL Device
searches for a connection, it searches only this frequency. If you want the ZyXEL Device
to search other frequencies, enter them in the
DL Frequency fields.
The following table describes some examples of DL Frequency settings.
Click Network > WAN > WiMAX Frequency to display the screen shown next.
Table 15 DL Frequency Example Settings
EXAMPLE 1 EXAMPLE 2
DL Frequency [0]: 2500000 2500000
DL Frequency [1]: 2550000 2550000
DL Frequency [2] 0 2600000
DL Frequency [3]: 0 0
DL Frequency [4]: 0 0
The ZyXEL Device
searches at 2500000 kHz,
and then searches at
2550000 kHz if it has not
found a connection.
The ZyXEL Device
searches at 2500000 kHz
and then at 2550000 kHz
if it has not found an
available connection. If it
still does not find an
available connection, it
searches at 2600000 kHz.