ZyXEL Communications MAX-200M1 Series, User Manual

Page: 42 / 258

ZyXEL MAX-200M1 Series User’s Guide
42 Chapter 3 Tutorial
2 The following screen displays. This screen is where you enter your Internet access
details.
Figure 10 Tutorial: Internet Access Settings
In the ISP Parameters for Internet Access area, enter your username (‘User1234’) in
the User field, and enter your password (‘4321’) in the Password field. Your ISP gave no
information about the other fields in this section, so leave them at their defaults.
In the WAN IP Address Assignment area, make sure that Get Automatically from ISP
(Default) is selected. Leave all other fields at their default values.
3 Click Apply . Your Internet access settings are saved to the ZyXEL Device, and are used
automatically each time you connect to the Internet.
3.1.2 Configure WiMAX Settings
The WiMAX Frequency screen allows you to specify a set of frequencies to search for a
connection to a base station. Before you start, you need information from your ISP about the
supported frequencies.
In this example, your ISP has told you that the supported WiMAX frequencies are at 2.55 and
2.56 Gigahertz (GHz). See
Section 7.4 on page 74 for more information on radio frequencies.
Follow the steps below to configure your frequency settings.
1 Click Network > WAN > WiMAX Frequency to open the screen shown next.