Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
68
7.3.3 WPA- PSK/ WPA2- PSK
Select
WPA- PSK
or
WPA2- PSK
from the
Se c urity Mo de
list.
Fig ure 37
Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the LTE3301 and the wireless stations must use
the same WEP key for data transmission.
If you chose
64- b its
, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9",
"A-F").
If you chose
128- b its
, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-
F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
Apply
Click
A p p ly
to save your changes back to the LTE3301.
Cancel
Click
C a nc e l
to reload the previous configuration for this screen.
Table 20 Network > Wireless LAN > General: Static WEP (continued)
LABEL
DESC RIPTIO N
Table 21 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL
DESC RIPTIO N
Security Mode
Select
WPA - PSK
or
WPA 2- PSK
to enable data encryption.
WPA-PSK
Compatible
This field appears when you choose
WPA2- PSK
as the
Se c urity Mo de
.
Check this field to allow wireless devices using
WPA - PSK
security mode to connect to your
LTE3301.
