Chapter 6 WAN
LTE3301 Series User’s Guide
52
IPv6 Ra pid De plo ym e nt
Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network.
When the LTE3301 has an IPv4 WAN address, you can enable 6rd to encapsulate IPv6 packets in IPv4
packets to cross the ISP’s IPv4 network.
The LTE3301 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISP’s
Border Relay router (
BR
in the figure) to connect to the native IPv6 Internet. The local network can also
use IPv4 services. The LTE3301 uses it’s configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet.
Fig ure 28
IPv6 Rapid Deployment
6.4 Ma na g e m e nt WAN
The summary table shows you the WAN connection configured on the LTE3301. Click
Ne two rk
>
WAN >
Ma na g e m e nt WAN
from the
C o nfig ura tio n
menu.
Fig ure 29
Network > WAN > Management WAN
The following table describes the labels in this screen.
I SP ( I Pv 4)
I Pv6 I nt er net
I Pv4
I Pv6
BR
I Pv6 in I Pv4
I Pv4 I nt ernet
I Pv4
+
LAN
- I Pv6
- I Pv4
W AN
- I Pv 4
- I Pv6 in I Pv4
Table 13 Network > WAN > Management WAN
LABEL
DESC RIPTIO N
Interface
This field displays the name of the WAN interface for this connection.
Type
This field displays the type of the WAN connection.
IP Address
This field displays the IPv4 and IPv6 addresses of the WAN connection.
