ZyXEL Communications GS1910, User Manual

Page: 57 / 76

Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
57
9
Go to Configuration > MAC Table to disable MAC address learning on the reflector and
intermediate ports so that the Switch will NOT filter or forward a frame based on the frame’s
destination MAC address, or even drop the frame whose MAC address is not in the MAC address
table on these ports.
In Switch B:
1
Access the Switch through http://192.168.1.1. Log into the Switch by entering the username
(default: admin) and password (default: 1234).
2
Go to Configuration > Port Mirroring. Select Enabled in the Mode field to activate mirroring on
the Switch.
3
Set Type to Intermediate to configure the intermediate ports that help forward traffic.
4
Enter the remote port mirroring VLAN ID number (100 in this example). The Switch will
automatically create the remote port mirroring VLAN and configure the intermediate ports as a
member of this VLAN.
5
Configure ports (3 and 4 for example) to act as the intermediate ports that connect to Switch A and
Switch C.