ZyXEL Communications GS1910 User Manual Download Page 12

Page: 12 / 76

Chapter 2 Hardware Installation and Connection

GS1910/XGS1910 Series User’s Guide

Note: Do NOT block the ventilation holes. Leave space between devices when

stacking.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front

and 3.4 inches (8 cm) at the back of the Switch. This is especially important for
enclosed rack installations.

2.2 Mounting the Switch on a Rack

This section lists the rack mounting requirements and precautions and describes
the installation steps.

2.2.1 Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.

Failure to use the proper screws may damage the unit.

2.2.1.1 Precautions

• Make sure the rack will safely support the combined weight of all the equipment

it contains.

• Make sure the position of the Switch does not make the rack unstable or top-

heavy. Take all necessary precautions to anchor the rack securely before

installing the unit.

2.2.2 Attaching the Mounting Brackets to the Switch

Position a mounting bracket on one side of the Switch, lining up the four screw
holes on the bracket with the screw holes on the side of the Switch.

Figure 6

Attaching the Mounting Brackets

Summary of Contents for GS1910













































































Search results

Summary of Contents for GS1910

Reviews:

Related manuals for GS1910

Brands by name

Popular brands

ZyXEL Communications GS1910, User Manual

Search results

Summary of Contents for GS1910

Reviews:

Related manuals for GS1910

Brands by name

Popular brands