ZyXEL Communications GS1910, User Manual

Page: 42 / 76

Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
42
5
Click Save to save the settings to the Switch.
6
Click Configuration > VLANs > Ports in the navigation panel.
7
Set Port VLAN Mode to Specific and enter 200 in the Port VLAN ID field for port 10 to add a tag
to incoming untagged frames received on these ports so that the frames are forwarded to the VLAN
group that the tag defines.
8
To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
select Untag_all in the TX Tag field to set the Switch to remove VLAN tags before sending frames
out of these ports.
9
click Save to save your changes back to the Switch
.
5.5.2 Enabling IEEE 802.1x Port Authentication and Guest VLAN
Follow the steps below to enable port authentication to validate access to ports 1~8 to clients based
on a RADIUS server.
1
Click Configuration > Security > Network > NAS. Select Enabled in the Mode field to activate
IEEE 802.1x authentication on the Switch.