ZyXEL Communications ARMOR G1, User Manual

Page: 134 / 183

Chapter 13 System
NBG6818 User’s Guide
134
Figure 80 Settings > System > General Setting (Bridge Mode)
The following table describes the labels in this screen.
Table 47 Settings > System > General Setting
LABEL DESCRIPTION
System Settings
System Name System Name is a unique name to identify the NBG6818 in an Ethernet network.
Domain Name
(This is not available
if you are using
bridge mode)
Enter the domain name you want to give to the NBG6818.
Admin Inactivity
Timer Type how many minutes a management session can be left idle before the session times out.
The default is 5 minutes. After it times out, you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Select Language Select a language you prefer from the drop-down list box. The Web Configurator language
changes after a while without restarting the NBG6818.
Admin Password
Current Password Type the default password or the existing password you use to access the system in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays a dot for each character you type.
Confirm New
Password Type the new password again in this field.
Apply Click Apply to save your changes back to the NBG6818.
Cancel Click Cancel to discard all changes.