ZyXEL Communications ALC1224, User Manual

Page: 89 / 136

ALC1224 User’s Guide
Diagnostics 8-3
Table 8-3 Log Messages
LOG MESSAGE TYPE DESCRIPTION
Session Begin! INFO A console, telnet or FTP session has begun (see the <process> field for
the type of session).
Session End! INFO A console telnet or FTP session has terminated (see the <process> field
for the type of session).
Incorrect Password! WARN Someone attempted to use the wrong password to start a console, telnet
or FTP session (see the <process> field for the type of session).
Received Firmware
Checksum Error!
WARN A checksum error was detected during an attempted firmware upload (the
<process> field shows whether the web configurator or FTP was used).
Received Firmware
Size too large!
WARN The file size was too large with an attempted firmware upload (the
<process> field shows whether the web configurator or FTP was used).
Received Firmware
Invalid!
WARN Someone attempted to upload a firmware file with a wrong identity (the
<process> field shows whether the web configurator or FTP was used).
Received File
<file>!
INFO A file was uploaded to the ALC1224 by FTP.
<file> - received file’s name
THERMO OVER
TEMPERATURE:
dev:<id>
threshold:<threshol
d>(degree C)
value:<temp>(degree
C)!
WARN The temperature was too high at one of the three temperature sensors.
<id> - 0: sensor near the power module
- 1: sensor near the CPU
- 2: sensor near the ADSL chipset
<threshold> - threshold temperature
<temp> - temperature when the entry was logged
THERMO OVER
TEMPERATURE
released: dev:<id>
threshold:<threshol
d>(degree C)
value:<temp>(degree
C)!
INFO The temperature at one of the three temperature sensors has come back
to normal.
<id> - 0: sensor near the power module
- 1: sensor near the CPU
- 2: sensor near the ADSL chipset
<threshold> - threshold temperature
<temp> - temperature when the entry was logged
THERMO OVER
VOLTAGE:
nominal:<nominal>(m
V) value:<voltage>
mV)!
WARN The line card’s voltage went outside of the accepted operating range.
<nominal> - nominal voltage of the DC power
<voltage> - voltage of the DC power when logged
THERMO OVER VOLTAGE
released:
nominal:<nominal>(m
V) value:<voltage>
(mV)!
INFO The line card’s voltage is back inside the accepted operating range.
<nominal> - nominal voltage of the DC power
<voltage> - voltage of the DC power when logged
8.4 Diagnostic DSL Screen
Click DSL in the Diagnostic screen to open the ALC DSL Line Diagnostic screen.