ZyXEL Communications ALC1224, User Manual

Page: 114 / 136

ALC1224 User’s Guide
11-10 ADSL Port Commands
where
<slot-port> = The number of the slot where the ALC1224 is located and the number of
an ADSL port.
<all|tag> =
Type
all
to have the line card accept Ethernet frames with or without
VLAN tags. Type
tag
to have the line card only accept Ethernet frames
with VLAN tags.
This command sets a port to accept either all Ethernet frames or just those that have a VLAN tag.
The following example sets ADSL port 1 on the line card in slot 3 to only accept Ethernet frames with VLAN tags.
ras> lcman port frametype set 3-1 tag
11.3.13 Packet Filter Show Command
Syntax:
lcman port pktfilter show <slot>
where
<slot> = The number of the slot where the ALC1224 is located.
This command displays the line card’s packet type filter settings.
The following example displays the packet type filter settings for the ALC1224 in slot 5.
Figure 11-7 Packet Filter Show Command Example
ras> lcman port pktfilter show 5
[slot5 (alc-71)]
port pktfilter
---- -----------------------------
1 accept-all
2 accept-all
3 accept-all
4 accept-all
5 accept-all
6 accept-all
7 accept-all
8 accept-all
9 accept-all
10 accept-all
11 accept-all
12 accept-all
13 accept-all
14 accept-all
15 accept-all
16 accept-all
17 accept-all
18 accept-all
19 accept-all
20 accept-all
21 accept-all
22 accept-all
23 accept-all
24 accept-all