ZyXEL Communications ALC1224 User Manual Download Page 75

Page: 75 / 136

ALC1224 User’s Guide

Maintenance

6-1

Chapter 6

Maintenance

This chapter explains how to use the ADSL line card’s maintenance screen.

6.1 Maintenance Overview

The web configurator allows you to upload new firmware to the ADSL line card.

6.1.1

Firmware Upgrade Screen

Click

Maintenance

in the navigation panel and then

Firmware Upgrade

in the

Maintenance

screen.

Click a card’s link in the

Firmware Upgrade

screen to open the

Card Firmware Upgrade

screen.

Use the

Card Firmware Upgrade

screen to upgrade the card's firmware. Click

to go to the

Firmware

Upgrade

screen.

Do not interrupt the upgrade process, as it may permanently damage the card.

The card automatically restarts when the upgrade process is complete.

Procedure to upgrade your firmware:

Step 1.

Use the card’s

Statistics

screen to check its current firmware version number.

Download and unzip the new firmware.

Go to the

Card Firmware Upgrade

screen.

Type the path and file name of the firmware file you wish to upload to the line card in the

File Path

field

or click

Browse

to display the

Choose File

screen from which you can locate it. After you have specified

the file, click

Upload

Figure 6-1 Card Firmware Upgrade

Summary of Contents for ALC1224









































































































































Search results

Summary of Contents for ALC1224

Reviews:

Brands by name

Popular brands

ZyXEL Communications ALC1224, User Manual

Search results

Summary of Contents for ALC1224

Reviews:

Brands by name

Popular brands