ZyXEL Communications ALC1224, User Manual

Page: 74 / 136

ALC1224 User’s Guide
5-4 IEEE 802.1Q VLAN
Figure 5-3 ALC Management VLAN Edit
Table 5-3 ALC Management VLAN Edit
LABEL DESCRIPTION
Up Click this link to go to the Static VLAN Setup screen.
VLAN ID This is the number that identifies the VLAN group. When you add a static VLAN, type a
number (1-4094) to identify the VLAN.
Active This read only check box is selected when VLAN is enabled on the management switch
card. It is cleared when VLAN is disabled on the management switch card.
Port Number This field displays the port number.
Normal Select Normal registration for the associated port if you want that port to join this VLAN
group using GVRP, this item is not available on the ALC1224.
Fixed Fixed registration ports are permanent members of this VLAN group.
Forbidden Select forbidden for a port to block that port from joining this VLAN group.
TX Tagging Select TX Tagging registration for the associated port if you want that port to tag all
outgoing frames transmitted. Only select this if the subscriber's DSL modem or router
supports 802.1Q VLAN.
Click Apply to save your changes back to the line card. Click Reset to begin configuring this screen afresh.