ZyXEL Communications ALC1224, User Manual

Page: 106 / 136

ALC1224 User’s Guide
11-2 ADSL Port Commands
Figure 11-1 Port Show Command Example
11.3.2 Port Disable Command
Syntax:
lcman port disable <slot-port>
where
<slot-port> = The number of the slot where the ALC1224 is located and the number of
an ADSL port.
This command forcibly disables the specified ADSL port.
The factory default of all ports is disabled. A port must be enabled before data transmission can
occur. An enabled but disconnected ADSL port generates more heat than an operating port. To
minimize heat generation and to enhance reliability, remember to disable a port when it is not in
use.
11.3.3 Port Enable Command
Syntax:
lcman port enable <slot-port>
where
ras> lcman port show 3
[slot3 (alc-73)]
port enable mode pvid priority profile
---- ------ ------ ---- -------- -------------------------------
1 - auto 1 0 DEFVAL
2 - auto 1 0 DEFVAL
3 - auto 1 0 DEFVAL
4 - auto 1 0 DEFVAL
5 - auto 1 0 DEFVAL
6 - auto 1 0 DEFVAL
7 - auto 1 0 DEFVAL
8 - auto 1 0 DEFVAL
9 - auto 1 0 DEFVAL
10 - auto 1 0 DEFVAL
11 - auto 1 0 DEFVAL
12 - auto 1 0 DEFVAL
13 - auto 1 0 DEFVAL
14 - auto 1 0 DEFVAL
15 - auto 1 0 DEFVAL
16 - auto 1 0 DEFVAL
17 - auto 1 0 DEFVAL
18 - auto 1 0 DEFVAL
19 - auto 1 0 DEFVAL
20 - auto 1 0 DEFVAL
21 - auto 1 0 DEFVAL
22 - auto 1 0 DEFVAL
23 - auto 1 0 DEFVAL
24 - auto 1 0 DEFVAL