ZyXEL Communications ALC1224, User Manual

Page: 122 / 136

ALC1224 User’s Guide
11-18 ADSL Port Commands
ras> lcman port dot1x control 3-1 auto
11.7.5 Dot1x Re-authentication Command
Syntax:
lcman port dot1x reauth <slot-port> <on|off>
where
<slot-port> = The number of the slot where the ALC1224 is located and the number of an
ADSL port.
<on|off> =
Use
on
to require a subscriber to periodically re-enter his or her username and
password to stay connected to the port (some IEEE 802.1x clients do this
automatically).
Use
off
to not require a subscriber to periodically re-enter his or her username
and password to stay connected to the port (some IEEE 802.1x clients do this
automatically).
This command sets whether or not a subscriber has to periodically re-enter his or her username and password to
stay connected to the specified port.
The following example sets the line card to require each subscriber connected to ADSL port 1 on the line card in
slot 3 to periodically re-enter his or her username and password to stay connected.
ras> lcman port dot1x reauth 3-1 on
11.7.6 Dot1x Period Command
Syntax:
lcman port dot1x period <slot-port><seconds>
where
<slot-port> =
The number of the slot where the ALC1224 is located and the number of an
ADSL port.
<seconds> =
How often (60~65535 seconds) a subscriber has to re-enter his or her username
and password to stay connected to the port.
This command sets how often a subscriber has to re-enter his or her username and password to stay connected to
the specified port.
The following example sets the line card to require each subscriber connected to ADSL port 1 on the line card in
slot 3 to periodically re-enter his or her username and password every 43,200 seconds (12 hours) to stay connected.
ras> lcman port dot1x period 3-1 43200