ZyXEL Communications ALC1224, User Manual

Page: 72 / 136

ALC1224 User’s Guide
5-2 IEEE 802.1Q VLAN
Table 5-1 ALC Static VLAN Setup
LABEL DESCRIPTION
VLAN Setup Click this link to go to the Static VLAN Setup screen.
VLAN ID This is the number that identifies the VLAN group. Click a link in the VLAN ID column to
open a screen where you can edit the static VLAN.
Active This field displays whether the VLAN is currently enabled Yes or disabled No .
Add Click this button to add a new VLAN ID.
Delete Select a channel’s Delete check box and click the Delete button to remove the channel.
5.3 ALC Static VLAN Entry Add or Edit Screen
Click VLAN Setup in the navigation panel and then a card’s link in the VLAN Setup screen.
Click the Add button or a VLAN ID in a card’s Static VLAN Setup screen to open this screen.
Use this menu to set up IEEE 802.1Q VLAN parameters for this line card. In a typical setup, DSL port or even an
individual channel on a port uses a different VLAN ID (VID) to distinguish service types.
Figure 5-2 ALC Add Static VLAN