ZyXEL Communications ALC1224, User Manual

Page: 103 / 136

ALC1224 User’s Guide
Commands 10-7
Table 10-2 Engineer Shell Commands
COMMANDS DESCRIPTION
macfilter set <slot-port>
<mac>
Adds a MAC filter MAC entry.
macfilter delete <slot-port>
<mac>
Removes a MAC filter MAC entry.
macfilter list <slot> Displays the MAC filter settings.
maccount enable <slot-port> Turns on the MAC count filter.
maccount disable <slot-port> Turns off the MAC count filter.
maccount set <slot-port>
<count>
Sets the MAC count filter for a specific port.
maccount list <slot> Displays MAC count filter settings.
dot1x enable Turns on 802.1X for the whole system.
disable Turns off 802.1X for the whole system.
list <slot> Displays 802.1X settings.
port enable <slot-port>
Turns on 802.1X for specific ports.
disable <slot-port>
Turns off 802.1X for specific ports.
control <slot-port>
auto|auth|unauth
Sets the 802.1X port authentication option
for specific ports.
reauth <slot-port> on|off Sets the 802.1X re-authentication option for
specific ports.
period <slot-port> <seconds> Sets the 802.1X re-authentication period for
specific ports.
config convert Backward compatibility command.
maccount active <slot> Turns on a line card’s MAC address count
filter.
inactive <slot> Turns off a line card’s MAC address count
filter.
set <slot> <count> Sets a line card’s MAC address count filter.
list Displays the system’s current MAC address
count settings.
command <slot> <subcommands> Sends commands to the line card in the
specified slot.
lineinfo <port> This command shows the statistics of the
specified DSL ports.
lineperf <port> This command shows the line quality of the
specified DSL port.
loopback <port> <mode> Performs loopback test. <mode> = "local" or
"f5"
list port <port> Displays line settings.
list ports Displays line settings on all ports.
stat ch <port> <vpi> <vci> Displays channel status of all DSL lines.