ZyXEL G-560 User’s Guide
5-4
System Screens
Table 5-2 System Settings
LABEL DESCRIPTION
IP Address
Enter the IP address of your G-560 in dotted decimal notation.
If you change the G-560's IP address, you must use the new
IP address if you want to access the web configurator again.
Subnet Mask
Enter the subnet mask.
Gateway IP
Address
Type the IP address of the gateway. The gateway is a router or switch on the same
network segment as the G-560. The gateway helps forward packets to their
destinations. Leave this field as
0.0.0.0
if you do not know it.
Apply
Click
Apply
to save your changes back to the G-560.
Reset
Click
Reset
to reload the previous configuration for this screen.
5.4 Time
Settings
To change your G-560’s time and date, click
SETTINGS
,
SYSTEM
and then the
Time Settings
tab. The
screen appears as shown. Use this screen to manually enter a time and date. Log times and dates are based on
the time and date you configure here.
Figure 5-2 Time Settings
The following table describes the labels in this screen.