ZyXEL G-560 User’s Guide
3-4
Introducing the web configurator
3.2.1 Basic Settings
Click
SETUP WIZARD
to display the first wizard screen shown next. Refer to the
System Screens
chapter
for more background information.
1.
Enter a descriptive name to identify the G-560 in the Ethernet network.
2.
Select
Obtain IP Address automatically
if you want to put the G-560 behind a router that assigns an
IP address. If you select this by mistake, use the
Reset
button to restore the factory default IP address.
3.
Select
Use fixed IP address
to give the G-560 a static IP address. The IP address you configure here
is used for management of the G-560 (accessing the web configurator).
Enter a
Subnet Mask
appropriate to your network and the
Gateway IP Address
of the neighboring
device, if you know it. If you do not, leave the
Gateway IP Address
field as
0.0.0.0
.
Figure 3-4 Wizard 1: Basic Settings
If you change the ZyXEL G-560’s IP address, you must use the
new
IP address if
you want to access the web configurator again.
Do not select this unless you have a router
that can assign the G-560 an IP address.