ZyXEL Communications 2864 Series, User Manual, Page: 99 / 267

8–13
S28 Bit-mapped register; default: 68:
S29 Default dial phone number pointer; default: 0:
Use
AT&Zn=<number>
to store a phone number at address n.
&K3 011 3 V.42 + MNP4.
&K4 100 4 V.42 + V.42bis (Compatible with
&K2
;
default; see also
S38b5
).
Code Bits Bin. Dec. Description
B0 (7) 0 0 Selects ITU-T V.22 for 1200 bps communi-
cation. (Default)
B1 1 128 Selects Bell 212A for 1200 bps communica-
tion.
&B0 (6) 0 0 DTE/DCE rate follows link rate. (See also
S18
,
S44b6
)
&B1 1 64 DTE/DCE rate is fixed at the DTE setting,
range from 300 to 460.8 Kbps. (Default;
see also
S44b6
)
&G0 (5,4) 00 0 No guard tone. (Default)
&G1 01 16 Reserved.
&G2 10 32 1800 Hz guard tone.
&Y0 (3,2) 00 0 Destructive, expedited break.
&Y1 01 4 Non-destructive, expedited break. (Default)
&Y2 10 8 Non-destructive, un-expedited break.
*L0 (1) 0 0 Panel key is normal. (Default)
*L1 1 2 Panel key is locked.
&J0 (0) 0 0 Single line, RJ11 phone jack. (Default)
&J1 1 1 Multiple phone/modem line, RJ12/RJ13
phone jack.
Code Dec. Description
*Dn 0-49 Sets the default dial phone number pointer at
location n in the phone directory stored in
EEPROM.
Code Bits Bin. Dec. Description