ZyXEL Communications 2864 Series, User Manual, Page: 115 / 267

9–5
Examples:
X5: CONNECT 38400/V.32 9600T/MNP5
CONNECT 115200/V.34 28800/V.42b
Error control level is from
NONE
to
V.42b
.
X6: CONNECT 9600/ARQ
CONNECT 28800/ARQ
Error control level is either
ARQ
or not given at all.
X7: CONNECT 9600/ARQ/MNP5
CONNECT 28800/ARQ/V.42b
Use
S35.7=1
to enable the following numerical result codes when
an error control connection is being made:
Z0
Reset modem and load user profile 0.
Z1
Reset modem and load user profile 1.
Z2
Reset modem and load user profile 2.
Z3
Reset modem and load user profile 3.
Z4
Resets the modem and loads the factory settings, also sets the factory
default as power-on profile.
*. Data compression included.
/SREJ
is appended if a V.42 connection with selec-
tive reject is established.
**. When more than one type of Distinctive Ring is turned on (
S40b3-6
),
RING n
will be reported, n=Ring type (1-4).
***. Use
S42b6
to disable
RINGING
result code.
ATVO
Code ATV1
String ATVO
Code ATV1
String
50 CONNECT 58 CONNECT 16800
51 CONNECT 1200 59 CONNECT 19200
52 CONNECT 2400 60 CONNECT 21600
53 CONNECT 4800 61 CONNECT 24000
54 CONNECT 7200 62 CONNECT 26400
55 CONNECT 9600 63 CONNECT 28800
56 CONNECT 12000 64 CONNECT 31200
57 CONNECT 14400 65 CONNECT 33600
Note: Factory default (
Z4
) is the default power-on profile when the
modem is shipped out of the factory.
ATZn
also sets profile n to be
the power-on profile.
ATZn
sets
FCLASS=0
.