manualshive.com logo in svg

ZyXEL Communications 2864 Series, User Manual, Page: 4 / 267

Share
Download
ZyXEL Communications 2864 Series User Manual Download Page 4

iv

Acknowledgments

Trademarks mentioned in this manual are used for plain informational purpose. 
Trademarks are properties of their respective owners.

U-Modem

, ZFAX

 and ZyXEL

 are trademarks of ZyXEL Communications 

Corporation.

Smartmodem

 is a registered trademark of Hayes Microcomputer Products, Inc.

MNP

 is a registered trademark of Microcom, Inc.

IBM PC, XT, AT and OS/2 are trademarks of International Business Machine Cor-
poration.

Touch-tone

 is a trademark of American Telephone and Telegraph Corporation.

WINDOWS

 is a trademark of Microsoft Corporation.

ATARI, ST, STE, MEGA STE, TT, and Falcon030 are trademarks or registered 
trademarks of Atari Corporation.

Apple

, Macintosh

, and Lisa

 are registered trademarks of Apple Computer Inc.

NeXT

, NeXT Cube, and NeXT Station are registered trademarks of NeXT, Inc.

Amiga

 is a registered trademark of Commodore Business Machines.

.

Summary of Contents for 2864 Series












































































































































































































































































Reviews:

No comments