ZyXEL Communications 2864 Series, User Manual, Page: 79 / 267

7–1
Chapter 7
PROFILES
The 2864 series modems let you save up to 4 sets of configurations which are called
profiles. You can save each entire modem configuration in the non-volatile EEP-
ROM memory for later use as default settings, or you can use it as the power-on de-
fault. Use the
SAVE TO configuration submenu to save the current configuration to
a profile, or use the
&Wn
command to save to profile n.
AT&Wn
Please note the different use of profile numbers in the
AT&Vn
and
AT&Wn
com-
mands.
There are 5 sets of pre-programmed profiles that come with each 2864 series mo-
dem. One is the factory default that is stored in the ROM and is not user alterable.
The other four are stored in the non-volatile memory and are pre-programmed to
suit the most common applications. You can modify these profiles and save them for
your specific applications. You can view each set of profile settings by typing
AT&Vn
(n=0-5) from the terminal. The commands and their responses are as follows. The
value shown for each register is a decimal number.
AT&V0
Current Settings.............
B0 E1 L4 M1 N5 Q0 V1 X5
&B1 &C1 &D2 &G0 &H3 &J0 &K4 &L0 &M0 &N0 &P0 &R1 &S0
&X0 &Y1
*B0 *C0 *D0 *E0 *F0 *G0 *I0 *L0 *M0 *P9 *Q2 *S0
S000=000 S001=000 S002=043 S003=013 S004=010
S005=008 S006=003 S007=060 S008=002 S009=006
S010=007 S011=070 S012=000 S013=000 S014=002
S015=130 S016=000 S017=018 S018=000 S019=000
S020=001 S021=178 S022=000 S023=105 S024=138
S025=000 S026=000 S027=156 S028=068 S029=000
S030=000 S031=017 S032=019 S033=255 S034=030
S035=032 S036=000 S037=000 S038=000 S039=032
S040=000 S041=000 S042=000 S043=008 S044=000
S045=100 S046=028 S047=064 S048=000 S049=006
S050=000 S051=000 S052=000 S053=000 S054=000
S055=000 S056=000 S057=000 S058=000 S059=000
S060=000 S061=000 S062=000 S063=000 S064=000