Zypcom Z34-PL, User Manual

Page: 98 / 114

B
Appendix B-2
+FMR?
Identifies product version number
+FREV?
Identifies product version number
Fax Class 1 AT Commands
+FCLASS=n
Mode selection default=0. Settings: 0, 1. The DTE can
be 300 to 115200 bps when +FCLASS=0. When
+FCLASS=1, the DTE should be set to 19200 bps.
+FRH=n
Receives HDLC data type. The only setting for this
command is 3.
+FRM=n
Selects receive data modulation. Modulation standards
followed by ST represent short training. Settings are 24
(V.27ter/2400), 48 (V.27ter/4800), 72 (V.29/7200), 73
(V.17/7200), 74 (V.17ST/7200), 96 (V.29/9600), 97
(V.17/9600), 98 (V.17ST/9600), 121 (V.17/12200), 122
(V.17ST/12200), 145 (V.17/14400) and 146 (V.17ST/
14400). This command is normally controlled by fax
Class 1 software.
+FRS=n
Controls the amount of time in .01seconds that the
modem will wait for silence before sending OK message
to fax software. Wait for silence range is 1-255.