Zypcom Z34-PL, User Manual

Page: 56 / 114

3-18
3
&F (Load Factory
Profile)
Loads the factory default setting for each command into
the active profile. AT&F&W0 loads the factory defaults
into stored profile 0.
&Gn (Guard Tone
Control)
Defines how the modem will handle guard tone. Guard
tone is a frequency generated by the answer-side
modem.
C
OMMAND
D
ESCRIPTION
&G0* Disables guard tone.
&G1 Enables 550-Hz guard tone.
&G2 Enables 1800-Hz guard tone.
&Kn (Flow Control)
Specifies the DTE-to-modem flow control. Software flow
control uses the characters XOFF and XON to stop and
start data transmission, respectively, both to and from
the DTE. Bidirectional hardware flow control uses RTS/
CTS to stop and start data from the modem.
C
OMMAND
D
ESCRIPTION
&K0 Disables flow control.
&K3* Bidirectional hardware flow control
&K4 Xon/Xoff software flow control