Zypcom Z34-PL, User Manual

Page: 90 / 114

4-14
4
The other end could be busy or not answering. Make
sure the number you dialed is correct and test the
number by dialing it on your telephone, not through
your modem. If you are using the modem
internationally, your modem may not recognize the dial
tone in the local country. Try the command ATX3DT
and the telephone number.
Error Message
Make sure you selected the correct modem in your
communications software. If you are typing from the
command line in terminal mode, make sure you typed
correctly. Make sure you are issuing the correct AT
command.
NOTE: Not all modems support the same AT
command set. Check the AT command set in this
manual to ensure that you are using a supported
AT command in your modem's initialization string.
Modem COMM Error
or Modem Not Found
Make sure you have selected the correct COM port in
your communications software setup. Check all the
cable connections and make sure they are secure. In
fax software, make sure you have selected the correct
fax class (Class 1). The port setting in the Control Panel
in Windows may not be set properly.
Modem Would Not
Fax
Make sure you have selected Class 1 as your fax class.
Make sure that you do not have another
communications program open. Be sure you selected
the fax printer in your word processing program.