Zypcom Z34-PL, User Manual

Page: 80 / 114

4-4
4
2. Make sure that your terminal or communications
software is set for 10 bits per character. The total of
the data bits, parity bit, and the start and stop bits
must equal 10. The modem automatically
determines speed and parity for 10-bit characters.
The most common settings are:
q
8N1 (8 data bits, no parity, 1 start bit, and 1
stop bit)
q
7E1 (7 data bits, even parity, 1 start bit, and 1
stop bit)
q
7O1 (7 data bits, odd parity, 1 start bit, and 1
stop bit)
3. Type AT<ENTER> . The TXD and RXD LEDs should
reflect some activity by monitarily turning on/off. If
these LEDs show activity when you type
AT<ENTER>, then type AT&F&W<ENTER> or type
AT&V<ENTER>, which should show activity on the
RXD LED.
Other
Communications
Programs
If you are using a different communications software
package, verify that the modem’s software settings
match those of the communications software or
terminal.
1. In the modem’s default setting, CXR is set normal.
Some software packages need CXR to be on. In AT
autodialing, you can control this option using the
AT&C
n command.