Operating Manual – Mountain bike with electric motor / 250 W rated power
05.08.2021 REV 1.1
32
Proceed as follows to adjust the saddle position or saddle angle:
-
Loosen the clamping screw under the saddle until the angle of the saddle can be adjusted
with a rocking movement.
-
Adjust the saddle so that it is horizontal or in the position that is most comfortable for you.
-
If necessary, the saddle can also be adjusted lengthwise to reduce or increase the distance
between the saddle and the handlebars
-
Finally retighten the clamping screw securely
Fitting the pedals
A T T E N T I O N
Irreparable damage to the threads by attempting to screw in the
wrong pedal.
-
Make sure that the thread of the pedal marked R is
screwed into the right-hand crank as seen in riding direc-
tion.
-
Make sure that the thread of the pedal marked L is
screwed into the left-hand crank as seen in riding direc-
tion.
The pedals have different threads. That is why the pedals
are marked L and R. The pedal marked L must be fitted
to the crank on the left-hand side of the bike as seen in
riding direction. The pedal marked R must be fitted to
the crank on the right-hand side of the bike as seen in
riding direction.
Angular
Adjustment
Longitudinal
Adjustment
Clamping
Screw
