ZDAS-16CA SERIES PROGRAMMING GUIDE
--------------------------------------------------------------------------------------------------------------------------------------------------------
PAGE
8
OF 19
Specification:
.
①
Function Indicator Light (Power, ARM, Signal, Status, Communication, Setting): Indicate
the working status of the System
Function
Indicator Light
Display
Explanation
ON
AC Power Supply Normal
Power Supply
OFF
AC Power Failure
ON
Dialing and Sending message Status, the line is busy
Communication
OFF
The line is not in use
ON
Signal from Wireless Detector Received
Signal
OFF
Normal Status
ON
Keypad Work Normal
Flashing Keypad Anti-Tamper Triggered
Status
OFF
Keypad ERR
ON
EXIT/BOUNDARY/Single Zone ARM
ARM
OFF
DIS-ARM Status
ON
Programming Status
Setting
OFF
Normal Status
②
②
②
②
Zone Indicator Light(1, 2, 3……14, 15, 16): Display the Zone Status
Display
Explanation
Lighting
Zone triggered; under learning status, ready to learn wireless
detector
Fast Flashing
Indicate the Zone disarm after Alarm, but the alarm status hasn’t
been erased
Slow Flashing
Wired Zone bad connection, the Circuit is Open or Short
Lighting
in
1
Second
Zones in Effect on ARM Status
Emergency Key (
③
③
③
③
,
,
) 24 hours Alarm Status, can be defined as Fire Alarm, Robbery
Alarm, Emergency Call; No indicator, no sound while alarm; If telephone preset, it will dial the
number while alarm, the communication light will on
Number Key (1, 2, 3, 4, 5, 6, 7, 8, 9, *, 0,
④
④
④
④
＃
＃
＃
＃
): For password and program set use.
Shortcut Key (
⑤
⑤
⑤
⑤
,
,
,
) Easy to operation with One Key.
--ARM;
--Boundary
ARM (Only when boundary Zones Preset);
--Pause;
--Confirm Key).
Buzzer Sound
⑥
⑥
⑥
⑥
; In this operation, different buzzer sound indicates different meaning
Sound reminde
r
Explanation
A long “di”
Remote Controller or Keypad command received
Long “di” in 1
minute
“Sound Zone” Alarm
A short “di”
A short sound “di” per press the Keypad
Short
“di”
3
times
Invalid Input or Remote Control Operation
A short “di” per
second
“Delay ARM” Started, or “Delay Zone” Activated, the sound will
end till the delay time is over
