ZDAS-16CA SERIES PROGRAMMING GUIDE
--------------------------------------------------------------------------------------------------------------------------------------------------------
PAGE
7
OF 19
Chapter 3 System Operation
3.1 System Operation
The main usage of the alarm system is to prevent illegal intruder from your home or office, or to get
help in emergency. When you are leaving your office or home, make sure all the windows and doors
are locked. Set ARM by remote controller or keypad of alarm panel, the system will be in guard
status. If any alarm zone is activated, the following circs will happen:
3.1.1 If panel connect with siren, and zone is under “sound alarm” status, the siren will be yelp
loudly and there will also be “di” from keypad on spot.
3.1.2 Alarm panel will send the alarm message to control center by telephone network if set to send
the alarm to control center.
3.1.3 If telephone number is set, it will dial the preset numbers in turn, After connecting telephone, it
can remote control (see 3.7) by telephone.
3.1.4 Zone LED will keep light on in alarm status untill
alarm memory is erased.
3.2 Operation of Remote Controller
(only for ZDAS-16CA-8/16/16G)
Remote Controller
：
ARM
：
：
：
：
Set Away ARM status
DIS-ARM
：
：
：
：
Set DIS-ARM status
BOUNDARY (Home) ARM Set BOUNDARY ARM
Emergency:
Emergency in robbing status or emergency call
Erasing Alarm message
：
：
：
：
Fast press twice “
” Key of the Remote Controller
Note: BOUNDARY ARM will be in effect only when BOUNDARY Zone was set.
3.3 Keypad Panel and Indicator LED Light
Parts Name:
①
---Function Indicator Light
②
--Zone Indicator Light
③
---Emergency Key
④
---Number Key
⑤
---Shortcut Key ( -ARM;
-Home ARM;
- Pause;
-Confirm Key)
