ZDAS-16CA SERIES PROGRAMMING GUIDE
--------------------------------------------------------------------------------------------------------------------------------------------------------
PAGE
1
OF 19
Thanks for choosing ZUDEN ZDAS-16CA Series Multi-Function Alarm Control Panel. We
suggest you reading carefully this guide, operating this system strictly on the standard procedure.
System ZDAS-16CA Series
is suitable for most circumstances and convenient for using, no matter
its appearance, function, or operation. We hope this Guide could answer most of your questions
when using the system.
Chapter 1 Summarize
1.1 Summarize
ZDAS-16CA Series
takes advanced microprocessor as its core technology. So it has the
advantages of high integration, very good stability, flexible function and convenient use.
1.2 Attentions before usage
σ
Get approval from local police office before presetting the police phone number as the
alarm phone number
σ
Ensure the system is in the correct installation, then connect AC power supply with
the panel
σ
Only suitable for DC 12V 7AH sealed lead rechargeable storage battery, be cautious
to connect red positive line with positive terminal
（
+
）
,and black negative line with
negative terminal
（－）
. The incorrect connection will cause damage of main panel.
σ
Rechargeable current
≤
1.5A
σ
Avoid metal parts or hand contact to the electronic parts on the circuit when install the
lines.
σ
Must use 2.7K resistor short unused wired zone
σ
Mark wires to avoid miss-connection when using too many wired zones
σ
Cut off all AC power supply, battery and telephone line before maintenance
σ
Short JP1 when reset main panel
σ
The 1.00MM copper-core wire from the keypad to alarm panel is up to 150 meters, 4
keypads can be connected in series
Note:
After the host programming, please pull out the jumper from JP1 on main board,
which can prevent other person operate the main panel and enhance the security of the
host
。
1.3 Features
σ
High speed digital communication, compatible ADEMCO 4+2, CID digital
communication protocol
；
Send alarm signal to alarm center.
σ
Can add a eight-way output module(optional), the output mode can be customized:
Linkage output; remote control output (mainly used for monitoring, control home
appliances, Lamp. See 4.35
）
σ
Different programmable settings, such as alarm sounds, zone types, recording,
monitoring, remote controlling, telephone number, phone line Check, and etc.
