ZDAS-16CA SERIES PROGRAMMING GUIDE
--------------------------------------------------------------------------------------------------------------------------------------------------------
PAGE
11
OF 19
press “6” paly the finished recorded voice message, then hang -up. If need record new voice, press
“7” for recording again till it’s satisfied.
3.9 Erasing Alarm message
:
Stop the flashing status of alarm indicator light, stop sending
messages to alarm center.
1, Operation: User password (6bit)
＋
(Confirm Key) (User Password Factory Setting: 123456)
Or press “
” key on the remote controller to erasing alarm message
2, If succeed, the buzzer will give a long sound “Di”, the zone indicator LED light off.
3.10 BY-PASS Zone Checking:
Press
, the zone LED will light on no more than 1 second.
Chapter 4 System Settings
4.1 Basic Settings from Factory
Name
Factory Settings
1. Installer Password
666666
2. User Password
123456
3. Zone Type
0---Instant alarm zone
4. Play recorded voice automatically
0---Inefficacy
5. AC Power Failure check
0---no checking
6. Keypad line cut –off check
0---no checking
7. Keypad anti-disassembly check
0---no checking
8. Telephone Remote Control
0---Inefficacy
9. Ring Times
8 times
10. Delay ARM
0---no delay time
11. Telephone Line Check
No Checking
12. Central Communication Protocol
0---CID
13. Telephone alarm control
Input ”1” ARM, input ”2” Disarm, input “3” Monitoring
14. Recording
No recording
15. Wireless Detector
No wireless detector
16. User Number
FFFF
17. Alarm Telephone Number
No number
Note
：
：
：
：
Items from 1 to 12 will return to factory default setting after “RESET”.
4.2 Reset
1. Operation; 951753082
＋
(Confirm Key);
2. Status: Reset successfully, the buzzer will sound a long” Di”, all the indicator LED will light on
