Chapter 4
Unpacking and Inspection
Table of Contents
4.1 Unpacking Preparation
Unpacking preparation for inspection:
l
Determine the participants from both parties, and both the user’s representatives and
the vendor’s representatives must be present during Unpacking & acceptance.
l
Determine where and how to keep the goods after the inspection.
l
Prepare proper tools like iron hammer, paper cutter, crowbar, and others.
4.2 Unpacking Wooden Case
Steps
1.
Use a nail hammer, a pair of pliers, a straight screwdriver and a crowbar to remove the
packing iron sheet and open the top cover (the arrow of the storage and transportation
symbol is directed at the top cover).
2.
Set the wooden case upright, and note that the supports should be downward.
3.
Pull out the cabinet from the wooden case.
4.
Remove the plastic bag of the cabinet.
Caution!
Do not remove the plastic bag until pulling out the cabinet. Hold the solid base of the
cabinet. Do not apply forces on non-rigid areas, which include cable support and fixing
beam, to avoid damaging the equipment.
– End of Steps –
4-1
SJ-20110531095035-004|2011-10-28 (R2.0)
ZTE Proprietary and Confidential
Summary of Contents for ZXG10 iBSC
Page 8: ...II ...
Page 167: ...Figures Figure 11 7 Step 3 of Board Unplugging 11 5 V ...
