25
Optional machine attachments
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
Boring attachment
Change borer
The borer is a cutting tool and therefore razor sharp. Observe the following safety
instructions to avoid injury:
- Never touch the tip of the borer, always hold it by the shank.
- Free borers that have become jammed with a suitable pair of flat nose
pliers.
- Do not leave dismantled borers on the work table or anywhere else on
the machine. Clear away loose borers immediately to avoid causing
injury to yourself and others.
• Insert the new borer in such a way
that the face of the borer shank
w
faces forwards towards the pressure
screw
q
. This position is necessary
to avoid damage to the borer shank
when the pressure screw is tightened.
It also positions the borer with a cut-
ting edge facing forwards.
• For the time being, tighten the pres
-
sure screw only lightly.
Fig. 25:
Boring attachment, inserting borer
As necessary:
