6
Overview
BACK
00012V40-GB-W
AR
TUNG FREIARM-FLACHBETTMASCHINEN_-_2022-09-27 - DC
Overview
The stated maintenance intervals are guidelines for conventional single
shifts. In case of 2 or 3-shift duty cycles, the intervals are to be reduced
accordingly.
Cleaning and maintenance work (each embroidery position)
Every day
- Clean rotary hook and surrounding area, oil rotary hook
- Clean thread trimmers and bobbin thread monitor
Every three
months
- Grease drive wheels (foot plate)
- Grease drive wheel (cylinder arm)
- Thread trimmer drive (underneath cylinder arm)
- Oil felt in drive unit (embroidery head)
- Oil felts in needle unit (embroidery head)
- Sequin device (grease spindle if used every day)
Every six
months
- Grease connecting rod (foot plate)
- Grease connecting rod (cylinder arm)
- Oil connecting rods in drive unit (embroidery head)
As necessary
- Clean upper thread guide elements (embroidery head)
- Boring attachment - Change borer
Cleaning and maintenance work (machine, general)
Every three
months
- Grease linear guide - Flatbed machines - SPRINT, JAFA, RACER
- Pantograph control)
All machines: grease side-to-side drive
- SPRINT, JAFA, RACER : grease side-to-side and front-to-back drive
Cleaning and maintenance work (control components)
As necessary
- Clean control components
- Clean ventilation filter
All installed lifting magnets are maintenance-free and must not be
oiled.
